User's Manual

● Triple coil free positioning technology allows wider charging area
compared to standard solutions
● Designed to be installed under surfaces with maximum thickness of 5 mm
(0.19 in)
● Designed in two variants:
● Variant 01: two power input lines
● Variant 02: two power input lines and one output Status Signal (SS).
The SS is controlled by the system and its function is to indicate if a
device is in charge (3.3V output) or not (Open Drain - HiZ output)
Specifications
Physical specifications
Dimensions: 61 x 103 x 9 mm (2.40 x 4.05 x 0.35 in) | Weight: 2 pin (V01): 87g (0.19
Ibs); 3 pin (V02): 90g (0.20 Ibs) | Cable length: 65 cm (1.47 ft).
Electrical specifications
Input Min 11.4V Max 14.5V | Input current Max 1A | Output wireless 10W | Average
Standby mode consumption ~ 25 mA | Storage temperature -10°C / 70°C |
Operating temperature 0°C / 40°C | Operating frequency 110.1-205KHz.
Pin Output
Variant 01: Triple coil embedded system 2 pin
MOLEX 430250200
Pin 1 signal: 12V
Pin 2 signal: GND
Pin Output
Variant 02: Triple coil embedded system 3 pin
MOLEX 436450300
Pin 1 signal: 12V
Pin 2 signal: status signal
Pin 3 signal: GND