User`s manual

- 43 -

Higher Power Multiple Deployment (Using motor’s ejection)

This example is for a much higher powered rocket, using the motor’s ejection charge to fire the

drogue near apogee. Since the projected altitude is likely to be higher than a lower powered

rocket, you will most likely want to have the second deployment occur at about 800’, higher than

what you had set it for the mid-power example.

Eggtimer Build_1.45 Flight Settings

T:23.50

A 200 LDA <50-500 by 50> P:97804.00

B 20 Burn/Coast Samp/sec: <4,5,8,10,15,20,25,33> A:975.39

50 Interval (ms) Main:0

C 2 Descent Samples/sec <1,2,4,5,10> CHB:0

500 Interval (ms) Batt:3.12

D 1 Main Enable <0-Off, 1-IGN, 2-Servo CCW, 3-Servo CW>

E 800 Main Altitude <100-2000 by 50, 0 @ Apogee>

F 2 Main ON-Time <1-9,0-Cont.>

G 0 CHB Enable <0-Off, 1-IGN, 2-Servo CCW, 3-Servo CW, 4-Airstart>

H 2 CHB ON-Time <1-9,0-Cont.>

I 3 Burn Timer <1-20>

J 0 Airstart Delay <0-9>

K 0 Telemetry

O Comments: HPR w/motor ejection

Options: Esc, A-O, ?

High-Power Full Multiple Deployment Example

This example is for a larger rocket using multiple deployment, with both channels of the

Eggtimer being used to fire charges. Other than setting Channel B to fire at Nose-Over, it’s the

same as the previous profile.