User`s manual

- 49 -
• To update the real-time readings on the right-hand side, press the ENTER key
• To change values: press the LETTER of the option, use +/- to change the values, hit ENTER to accept value
• To accept settings and save, hit the ESC key… the buzzer will start beeping slowly
(Eggtimer is now in Halted mode)
• To perform a Master Reset, clearing all flight memory and resetting to initial settings, hit CTRL and Y, then hold
button for 10 seconds to confirm (You should only need to do this once, unless otherwise instructed)
• To change Frequency/ID Code/Device Name, hit CTRL and F. Navigation is the same as the Flight Settings
screen.
Flight Display
• To enter Flight Display mode, press the ? key from the Programming Screen:
Eggtimer TRS 1.4K Saved Flight Summary
Page Apogee Max Veloc.
A 20 4525 677
B 19 1623 361
C 18 0 0
D 17 1736 537
E 16 1261 407
F 15 229 114
G 14 1778 394
H 13 1352 376
I 12 0 0
J 11 0 0
K 10 0 0
L 12 0 0
M 11 0 0
N 10 0 0
O 12 0 0
P 11 0 0
• To toggle the pages from the first 16 flights to the second 16 flights, press the + or – keys
• To select the flight to download, press the LETTER of the flight (i.e., “G” for the flight with an apogee of 1623
feet)
To download the Flight Summary Data:
• Open the capture buffer in your terminal program (see your terminal emulator’s documentation)
• Press the Button to download the summary data in .TXT format
• Close the capture buffer in your terminal program and save it to your computer as a .TXT file
The Eggtimer TRS is now ready to download the Flight Detail data…
To download the Flight Detail data:
• Open the capture buffer in your terminal program (see your terminal emulator’s documentation)
• Press the Button to download the detail data in .CSV format
• Close the capture buffer in your terminal program and save it to your computer as a .CSV file
Buzzer beeps slowly and continuously to let you know that it’s done and Halted
Flight Status Codes (from Flight Summary Download)
0 - Flight Not Started (in programming or pre-Ready mode)
1 - Waiting for LDA
2 - LDA reached
3 - Not used
4 - Not used
5 - Mach Lockout expired (< 100 ft/sec for over 1 second, after LDA)
6 - Nose-Over
7 - Drogue deployed (if selected)
8 - Main deployed (if selected)
9 - Landing detected