User`s manual

- 46 -
To test the Drogue deployment channel, enter the monitor mode by holding the Button down
while turning on the Eggtimer TRS. You will hear a long beep, and you will see a MON>
prompt on the terminal screen. Hit the “B” key, and you will hear a continuous warning beep.
Press the Button, and the Drogue igniter channel will fire for two seconds.
Afterwards, the Eggtimer TRS will go into Reset Mode, i.e. the buzzer will beep slowly and
continuously, Turn off the deployment power, then the Eggtimer TRS power.
.