Specifications

Eggtimer Remote Switch Quick Reference Guide
To Turn ON: Enter the programmed code, buzzer will beep 3 times
To Turn OFF: Enter the programmed code, buzzer will beep 2 times
To Program: Enter Eight D’s right after power-up, then enter an 8-button code
To Verify the Code: Enter Eight A’s, it will beep out the code as follows:
1 beep = A
2 beeps = B
3 beeps = C
4 beeps = D
Idle Chirps:
1 Chirp: Switch is “OFF”
3 Chirps: Switch is “ON”
Specifications:
Input: 6V-20V
Output: Same as input, 2.8A max. continuous, 8A peak
Radio: 315 MHz, ASK
Decoder: Princeton Technology PT2272
Range: Approx. 30’; up to 100’ using an additional antenna
Security: Over 65,000 possible combinations