User's Manual

8
changes, and will disappear after 10 seconds of inactivity.
SD Card Recording
The system is designed for SD card recording. You can manually record the video at your desire. Before
recording, you need to insert a SD card to the SD card slot. The system can support the size of up to
16GB SD card.
Recording Mode
Manual Recording
Press (Record) ● button on the receiver, the receiver starts recording. Press the button again to
cancel manual recording.
Schedule Recording
Go to Menu-Record-Schedule Record, set the recording start time and end time, then switch on
schedule recording to enable schedule recording. In this mode the receiver records at a certain time
each day.
Accessing Menu System
Press the MENU button on the receiver to enter menu system. Use the navigating buttons to navigate
up/down/left/right in the menu, and press the OK button to confirm a setting.
Main Menu
The Main Menu contains 4 submenus:
1. SETTING – In this submenu you can set date & time, brightness,
temperature alert parameters, camera volume, image zoom times,
choose the TV system for A/V output, select screen saver pictures ,
and reset the receiver to factory defaults (erases all configurations).
2. Record – Adjusts the quality of the image
3. Auto Mute – Auto mute function is to automatically cut off the
audio when there is only slight environmental noise on camera side.
In the submenu you can switch on/off this function.
4. Pairing – Use the pairing menu to add camera(s) to the receiver.
Settings
The Setting Menu contains 10 submenus:
1) Date& Time-sets the time value to show in the monitor screen
2) Brightness- used to adjust the brightness of the image
3)Temperature Unit—Choose the ℃ or ℉ for temperature unit
4). Temperature Alert – Sets the temperature alert range. Once the
temperature on camera side is out of the range, the monitor will beep
to alert you.