User's Manual

3. Press the MENU button on the receiver. Navigate to the

Pairing menu option by pressing the ▼▲ keys to navigate.

Press the OK button to open the Pairing menu.

4. Select a channel by pressing the UP and DOWN ▼▲

arrows. Press the OK button on the receiver to accept.

5. A message will be displayed on the receiver screen.

The receiver will count down from 30~0 – you must press the Pair

button on the camera during this time to successfully pair the

camera.

If the button on the camera is not pressed, the receiver will return

to the view screen, and no pairing will take place.

6. Press the Pair button on the back of the camera.

Once the camera has been paired, it will be immediately viewable

on the receiver monitor.

Troubleshooting

If you have problems with the system, there is often a quick and simple solution. Please try the following:

Problem Solution

No picture from a camera

1. Check all connections to the camera. Make sure the adaptor is

plugged in.

2. Make sure that the cameras and receiver are both ON.

3. Make sure that the camera is in range of the receiver.

4. If using the battery adaptor, try replacing the batteries

The picture is dropping

1. Move the camera closer to the receiver.

2. Try repositioning the camera, receiver or both to improve the

reception.

3. Adjust the monitor antenna to vertical position.