User's Manual

12
Auto Mute Menu
Auto mute function is to automatically cut off the audio when
there is only slight environmental noise on camera side.
Choose Yes to enable this function.
When auto mute function is enabled, the monitor audio will
be cut off after 5 minutes when there is only slight
environmental noise on camera side.
In auto mute mode, the audio can be activated by real noise
or higher sound detected on camera side. After last
activation, the monitor audio will go back to off status when there is no sound trigger within 5 minutes.
Pairing Menu
The system comes with camera(s) that have already been paired.
The pairing function assigns each camera to a different channel on
the wireless receiver (up to 4 Cameras), and it is necessary for
configuring additional cameras.
Use the UP▼ and DOWN▲ arrows to select the desired pairing
channel, and press the OK button to begin the pairing process with
a camera.
NOTE: It is highly recommended to pair the cameras to the receiver
before permanently mounting the cameras. See the pairing section
on this manual for details.
Camera Pairing
The system comes with camera(s) that have already been paired.
These cameras will communicate with the receiver once powered on.
The pairing function assigns each camera to a different channel on the
wireless receiver (up to 4 cameras), and is necessary for configuring
additional cameras.
NOTE: It is highly recommended to pair the cameras to the receiver
before permanently mounting the cameras.
1. Power on the camera by connecting the power adaptor or battery
pack, and turning the switch to ON. The power LED for the camera
should be ON.
2. Power on the receiver by connecting the power adaptor to the 5V Input on the side.