User's Manual

PICS User’s Manual 07 June 2004
9
Figure 2 PICS Manager Users Screen
3.2.1.2 Configuration Screen
The Configuration Screen is shown in Figure 3. It contains three sections. The
Enrollment Comm Port should be set to the RS-232 port that has the Enrollment Station
RF Interface attached. The baud rate should be set to 38400. The Light Tree Comm
Port should be set to disabled at present. The Database Configuration section contains a
path to the Interbase database, a database user name and a database password. The path
must be set to the database defined in paragraph 3.3.6. The Database User Name and
Database Password must be set if the software is required to log in automatically to the
database. If the Database User Name is left blank, the operator will be required to
enter a correct login before he is allowed access to the data. In order to set the User
Name and Password, enter the data in the correct fields and press Set User/Password.
If the two copies of the password disagree, the action will fail.