User's Manual

PICS POC User’s Manual 13 January 2003
[SYSTEM]
RF COM PORT=1
DISPLAY ENABLE=1
[ID UNIT]
BAUD RATE=19200
[TCPIP]
IP ADDRESS=172.16.32.225
NET MASK=255.255.255.0
DEFAULT GATEWAY=172.16.32.1
DNS SERVER=0.0.0.0
PORT NUMBER=50000
[REPORTING]
PORT ID=0
BAUD RATE=19200
PARITY=0x0100
DATA BITS=8
STOP BITS=1
Table 2 Reader.ini Field Definitions
Section Field Meaning
RF COM PORT
Identifies which Com Port is attached
to the RF interface. Should always
be 1.
SYSTEM
DISPLAY ENABLE
Set to 0 to disable message output to
the monitor. Typically should be left
at 1.
ID UNIT BAUD RATE
Specifies the baud rate of the RF
interface Com Port. Should always
be 19200.
IP ADDRESS
This is the IP address assigned to the
Reader by the network administrator.
Specified as xxx.xxx.xxx.xxx
NET MASK
This is the net mask associated with
the IP address. This value may be
obtained from the network
administrator.
DEFAULT GATEWAY
This is the IP address for the default
gateway. This value may be obtained
from the network administrator.
TCPIP
DNS SERVER
This value specifies the DNS server.
The Reader does not support DNS.
This value should be set to 0.0.0.0
16