Quick start guide

ManualsBrandsEfnote ManualsDrums & PercussionE-Drum Set

Quickstart Guide

Summary of content (20 pages)

PAGE 1
Quickstart Guide EN
PAGE 2
Hello! Contents IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Assembling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 3
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS MAY RESULT IN FIRE, ELECTRIC SHOCK, INJURY TO PERSONS, OR DAMAGE TO OTHER ITEMS OR PROPERTY. You must read and follow these instructions, heed all warnings, before using this product. Please keep this guide for future reference.
PAGE 4
IMPORTANT SAFETY INSTRUCTIONS Important Information Power supply Copyright • A small amount of current flows even when the power is turned off. If you will not be using this product for an extended period of time, you may desire to unplug the AC adapter from the AC outlet. • Duplication or reuse of the music and sound data contained in or included with this product without permission from the copyright holder is forbidden (with the exception of copying for personal use as permitted by copyright law).
PAGE 5
Assembling Assembling Packing List A Sound Module 1x H 18” Standard Cymbal 1x R Trigger Cable 4x B 12” Kick Pad 1x K Smartphone Tray 1x S AC Adapter 1x C 12” Snare Pad with Side-Rim 1x L Tripod Set 3x T Beater Patch 1x D 10” Tom Pad 2x M Snare Stand 1x U Tuning Key 1x E 12” Tom Pad 2x N Module Mount 1x Cable Tie 10x F 14” Hi-Hat Cymbals 1x P Multi-AX Cable 1x Quickstart Guide 1x G 16” Standard Cymbal 2x Q Multi-B Cable 1x N P Q R S T U 4x G
PAGE 6
Assembling Assembly CAUTION Please take your time with assembly and contact us with any questions (p. 19).
PAGE 7
Assembling 3 D D E E 4x 4 G 3x H G 7
PAGE 8
Assembling 5 * Kick pedal not included. B * Make sure that the three points firmly make contact with the floor using the adjustments below. * Be careful with the spikes * Adjust the angle of the base plate if your kick pedal is unstable. (Loosen four bolts to adjust.) 6 * Adjust the length if the legs are unstable.
PAGE 9
Assembling 8 A F K C B M * Be sure to tighten all knobs and bolts firmly. * Make sure that all stands are stable. * Be careful that your smartphone does not fall from the smartphone tray. Attaching the Beater Patch Attach the beater patch to where the kick pedal beaters touch on the head of the kick. T * Playing without the beater patch may cause damage of the head. * The beater patch is a consumable item. Replace when it has worn.
PAGE 10
Connection Connection 1 A 4x Q P 3 Firmly attach the included plug which is suitable for the outlet in your region. * Use only the included AC adapter and plug.
PAGE 11
Connection 2 CRASH1 RIDE RIDE CUP HH CTRL TOM1 TOM2 CRASH2 CRASH2 CUP* P Q SNARE TOM3 KICK TOM 4 SIDE RIM R R R SIDE RIM TOM 4 RIDE CRASH1 CRASH2 CRASH2 CRASH3* * The EFNOTE 3X does not include Crash 3 pad in the package. * You can use the CRASH 3 cable for the Crash 2 Cup.
PAGE 12
Basic Operation Basic Operation Panel Description Touch display Micro USB (To PC/Mac) Ring illumination Power (Push) Value knob (Rotate) Linear Indicator Speaker for click (Inside) Power On/Off Power On 1 2 1 sec. Power Off 1 2 3 4 * Without this procedure may result in loss of changes. * The power save function will turn power off automatically after specified period. It can be disabled (p. 17).
PAGE 13
Basic Operation Home Screen Switching drum kits Shows kit list Next drum kit Previous drum kit Volume Recorder Records your drum performances by MIDI. * Any other audio sources are not recorded. Analog AUDIO IN level USB audio in level Bluetooth audio in level Phones output level CAUTION Be sure not to listen to audio at a high volume. It can cause permanent hearing loss.
PAGE 14
Basic Operation Menu Organizes drum kits for gigs Manages your user custom instruments Shows the pad level faders (p. 15) Changes instrument on each pad (p. 15) Edits drum kit Provides basic drum beats Estimates your strike accuracy Displays your strike points on timeline Configures click setup Closes menu Configures general settings Configures triggers (pads) Connects Bluetooth device (p.
PAGE 15
Basic Operation Changing the Instrument 1 > 2 Hit the pad you want to change its instrument. 3 4 Changes are saved automatically. Adjusting the Pad Levels 1 > 2 Choose a pad. 3 Adjust the level. * Clipping may occur when exceeding 85%. * You can also choose the pad by hitting it. * If pinned, the selected pad cannot be changed by hit. Changes are saved automatically.
PAGE 16
Basic Operation Connecting Your Smart Device with Bluetooth You can connect your smart device to the EFNOTE 3X to listen to audio with Bluetooth. Connecting 1 > 2 Make sure the status is “Ready to pair“. If the status is “OFF”, tap it to turn on. On your smart device 3 Turn Bluetooth on. 4 Find new device discoverable as “EFNOTE AUDIO xxx“ (xxx is any value), and select it. 5 If pin code is required, enter “0000” (four zeros). 6 Tap [Pair].
PAGE 17
Basic Operation Changing the Power Save Setting 1 > 2 3 When “Off”, the module will not turn off automatically. Adjusting the Hi-Hat (Auto Calibration) 1 > 2 3 Drop the top hi-hat cymbal. 4 Adjusting the hi-hat manually • When the hi-hat sound is not closed enough despite you press the pedal firmly, increase the “Closed HH Tightness” value. • When the hi-hat sound is not open easily even if you slightly release the pedal, decrease the value. • The default setting is “0”.
PAGE 18
Specifications Specifications Electronic Drum Kit: EFNOTE 3X Sound Module: EFD-3X Item Specifications • 3-Zone: Snare, Crash 1/2*, Ride • 2-Zone: Tom 1/2/3/4, HH, Crash 3 • 1-Zone: Kick Trigger Interface * Crash 1 and Crash 2 inputs support 3-zone triggering with using TOM 4/CRASH 3 cables. * Crash 3 pad is not included.
PAGE 19
Support Optional components and consumable parts Option Item Adding a splash cymbal Replacing the drum head Replacing the beater patch EFD-C08 EFD-SCM5 EFD-MDH10 EFD-MDH12 EFD-KBP2 Description Splash Cymbal 8” * Using the CRASH 3 cable. Splash Cymbal Mount Mesh Drum Head 10” Mesh Drum Head 12” Kick Beater Patch * When any optional pad is added, configure the Assign and Pad model in the Trigger screen. See the Reference Guide for the detail.