User Manual
myefm.com
THE EFM
®
2 YEAR WARRANTY
Our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund
for a major failure and compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and
the failure does not amount to a major failure.
EFM
®
will happily repair or replace defective goods for up to 2 years
from the date of purchase. This warranty is against defects in the
EFM
®
goods purchased and does not cover damage caused by the
incorrect use or installation of the goods, or by modifications, or by
accident.
To claim under the warranty, you need to return the faulty product to
the place of purchase (at your expense) with a valid proof of purchase.
If you are not able to return the product to the place of purchase, you
can contact:
EFM Customer Service Department
PO BOX 684, Belmont WA 6104
P: 1300 069 336 (1300 0 MYEFM)
E: info@myefm.com
Important:
The 2 Year Warranty covers EFM
®
product and not your device.
Whilst we stand by our products, EFM
®
will not be liable to any
damages caused to your device from accidental impact. For more
information visit myefm.com/warranty-support
Multi-function button:
Use the multi-function ( ) button to;
• Play/pause a track
• Answer an incoming call
• End a call
Speaker Functions:
Introduction:
Thank you for choosing the EFM INDIO BLUETOOTH SPEAKER!
You can use this product with any Bluetooth compatible device to
stream music and enjoy hands-free calling. In order to get the best
results when using the speaker, please read this manual first.
Package Contents:
1. Bluetooth speaker unit 3. USB Charging cable
2. AUX Cable
4. User manual
INDIO SPEAKER USER MANUAL
Specification:
Speaker: Ømm W*
Charging time: . hours
Input: .V/.A
Bluetooth: .+EDR compliant
Built-in rechargeable battery: Li-on, .V, mAh
Playing time: - hours
Range: Up to m
Water Resistance Rating: IPX
Product Size: .mm x .mm x mm
Product Weight: g
Important Safety Precautions:
To ensure the safe use of your EFM INDIO BLUETOOTH SPEAKER,
please follow these precautions:
1. Keep the speaker and charging cable away from sources of
excessive heat.
2. Do not operate the speaker with a damaged cable or after it
has malfunctioned or been damaged in any way.
3. Do not attempt to disassemble the speaker unit.
Charging your speaker:
1. Connect one end of the supplied USB charging cable to the
charging port on your speaker.
2. Plug the other end of the USB charging cable into a suitable USB
port on your computer or compatible charging device. The LED
indicator light will show red and will turn o once the speaker is
fully charged.
We recommended charging the speaker for 10mins before
powering on if the unit has been unused for a week or more.
Volume/track function:
To change the volume while listening to music;
Increase volume: Short press on the “+” button
Decrease volume: Short press on the “- “ button
To change the track while listening to music;
Previous song: Long press on the “-” button
Next song: Long press on the “+” button
To change the volume during a call;
Increase volume: Long press on the “+” button.
Decrease volume: Long press on the “- “ button.
Wrist strap
Power on/o
Volume up/
Next track
Volume down/
Previous track
Multifunction
button
Status LED
Power on/off function:
To power on the speaker unit, press and hold “ ” for 3 seconds or
until the ‘Status LED’ comes on.
To power o the speaker unit, press and hold “ ” for 3 seconds
or until the ‘Status LED’ goes out.
AUX in
Charging LED
USB Port
Reset
Pairing your speaker:
1.
Ensure that the Bluetooth device you intend to pair is within
3m of the speaker unit and that the speaker unit is powered on.
2. Activate the Bluetooth function on your device. Please refer to
the manufacturer’s instructions if you are unsure how to
activate this function.
3. In your device’s Bluetooth manager and select ‘EFM INDIO
from the menu. If required, enter the password ‘0000’ to
confirm & finalise pairing.
4. Once successfully paired, a tone will sound and the white LED
indicator light will glow continuously.
5. To disconnect, select ‘EFM INDIO’ from the menu in your
device’s Bluetooth manager and deselect it.
The speaker will automatically reconnect to devices that support
automatic reconnection.
Call Function:
When connected to your device via Bluetooth, incoming calls will
automatically come through the speaker unit.
• To answer an incoming call, short press the “ ” button.
• To end a call, short press the “ ” button again. Music will
continue to play once the call has ended.
• To reject an incoming call, long press the “ ” button.
• To call back the last number called, short press the “ ” twice.
TWS Function (Connect Two):
You can pair 2 EFM Indio Speakers together to create a
surround sound eect. To do this;
. Turn both speakers on but do not pair them to your device
via Bluetooth.
. Long Press the “ ” button on the first speaker unit until
you hear a “TWS Paired” this should take - seconds to pair.
3. To pair your device, go to the Bluetooth manager in your
device and select ‘EFM INDIO’ from the menu. Pair as usual.
Both speakers should now be paired.
To Disconnect Paired Speakers;
. Press the “ ” button on the first speaker unit until you
hear a ‘TWS Disconnected’ tone.
Sub