SDS

1 amp FUSE LF6-A 05/09/2016
____________________________________________________________________________Page 1 of 3
Article Information Sheet
Copyright,2016, EFL Company.
A Safety Data Sheet (SDS) has not been prepared for these product(s) because they are articles. Articles
are not subject to the Occupational Safety and Health Administration’s Hazard Communication Standard
(29 CFR 1910.1200(b)(6)(v)). As defined in this standard: “Article” means a manufactured item other
than a fluid or particle: (i) which is formed to a specific shape or design during manufacture; (ii) which
has end use function(s) dependent in whole or in part upon its shape or design during end use; and (iii)
which under normal conditions of use does not release more than very small quantities, e.g., minute or
trace amounts of a hazardous chemical, and does not pose a physical or health risk to employees.
Document Group: 26-1323-0 Version Number: 1.00
Issue Date: 08/27/14 Supersedes Date: Initial Issue
SECTION 1: Identification
1.1. Product identifier
1 amp FUSE LF6-A.
Product Identification Numbers
80-6114-4157-9, 80-6114-4158-7, 80-6114-4159-5, 80-6114-4160-3
1.2. Recommended use and restrictions on use Recommended use Electrical, Electrical connections
generally 600 V or less, dry applications
1.3. Supplier’s details MANUFACTURER:
EFL Electric Fence Light Co
Cookeville, TN 38501
[e-mail]
1.4. Emergency telephone number USA: 931-268-7134 or 615-476-6128 (24 hours)
SECTION 2: Hazard identification
This product is exempt from hazard classification according to OSHA Hazard Communication Standard,
29 CFR 1910.1200.
SECTION 3: Composition/information on ingredients
Ingredient C.A.S. No. % by Wt
1 amp Fuse LF6-A Mixture N/A
_____________________________________________________________________________________