User Guide

Revision: 0 Date: 2004.2.26 (Manufacturing Section): PE
Difference Operating item Part name/specification Part/number Q'TY Operation description Important note Jig/fixture
1
Lock a screw on LOWER COVER as shown in the
diagram.
N/A
Electrical screwdriver:
1.5±0.1Kgf-cm
N/A N/A
3 SCREW ISOP M2.0 X 6.0L 41-850520-06
PAGE: 14
Name of S.O.P: efio!121i System Ass'y SOP
Working name: 7063
Explanation of illustrations
1
#8019 DISPLAY ASS'Y-12.1" XGA
TFT HYUNDAI-E12B
86-643905-00 1
(Twinhead S.O.P) (Document NO): TESOP389
Bar code machine
Chopstick1
Arrange wires: Place LCD's wires under bottom dent
and connect LCD wires to M/B.
Arrange wires as shown in the
diagram.
Take LCD. Wipe BARCODE and install LCD
MODULE on BASE MODULE
Do not damage upper cover
when assembling. When
installing LCD, make sure
hinges are both installed at the
same angle
2
2
1
Both hinges must be
installed horizontally
When inserting
BASECONNECTOR, do not
bend more than 180°. Bend as
shown in the diagram.
3
Twinhead International Corp.