User Guide

Revision: 0 Date: 2004.2.26 (Manufacturing Section): PE
Difference Operating item Part name/specification Part/number Q'TY Operation description Important note Jig/fixture
1
E12T-PCB ASS'Y-KN-DC-IN-REV:
D-W/MECHANICAL PART
80-878000-00D 1 Take a DC-in card; check appearance. N/A N/A
2 N/A N/A N/A
Connect DC-wire to DC-card and assemble it on base as
shown in the diagram.
N/A N/A
3
SCREW ISOT-M2X3L-SELF-
LOCKING ∮D3.5mm t=0.8mm-
41-721520-03 1 Fix the card with screws. N/A
Electrical screwdriver:
1.5±0.1Kgf-cm
4 N/A N/A 1 Arrange wires as shown in the diagram. N/A N/A
5
Tape (約2~3cm)
61-080022-00 1 Fix wires with tape as shown in the diagram N/A N/A
N/A bar code machineWipe CD-ROM bar code7 PRODUCT BAR CORD LABEL 63-000710-00 1
Take a assembled CD-ROM, insert CD-ROM on M/B
terminal.
Push in completely N/A1
PAGE: 07
(Twinhead S.O.P) (Document NO): TESOP389
Name of S.O.P: efio!121i System Ass'y SOP
Working name: 7056
E12T-#8019 KME DVD-RW KIT-
E1097-190
6 77-641008-20
1
Wires pass
through here
4
5
6
Wires pass
through here
2
3
7
Twinhead International Corp.