User Guide

Revision: 0 Date: 2004.2.26 (Manufacturing Section): PE

Difference Operating item Part name/specification Part/number Q'TY Operation description Important note Jig/fixture

DDR SO-DIMM-

HYMD564M646A(L)6-J-512MB-

DDR333-2.5V+-0.2V-200P

18-060006-30

3 BAR CODE LABEL 63-000710-00 1 Attach BAR CODE LABEL as shown in the diagram N/A N/A

4 NA NA 1 Insert SDRAM into M/B SOCKET Connecting parts must be clean N/A

E12T-VOID LABEL FOR TRIGEM-

KL1890

63-001584-10 1 Attach LABEL as shown in the diagram Do not attach to center part of CPU chip N/A

E12B-MYLAR FOR TOUCH PAD-

KS-0025(0.4mm)

50-023476-00 2 Attach MYLAR on two black buttons Push the rubber into the proper position. N/A

E12B-MYLAR FOR TOUCH PAD-

KS-0025(0.4mm)

50-023476-00 2 Attach MYLAR on two black buttons Push the rubber into the proper position. N/A

7 63-250190-00

Do not touch center part of CPU chip

Do not attach to center part of CPU chipAttach K/P LABEL on CPU

N/A

When assembling the CPU, turn in a clockwise direction

to lock; turn anti-clockwise direction to unlock.

CPU-BANIAS PGA-

1.6GHZ/600MHZ-uFC-PGA-

RH80535GC0

01-0076J3-G0 N/A

18-060005-E0

Explanation of illustrations

SDRAM DDR SO-DIMM-

HYMD232M646C(L)6-J-256MB-

DDR333-2.5V+-0.2V-200P

N/A

Using anti-static cloth, carefully wipe connecting parts N/A1

2 Attach BAR CODE LABEL as shown in the diagram63-250190-00 N/A

PAGE: 03

(Twinhead S.O.P) (Document NO): TESOP389

Working name: 7052

Name of S.O.P: efio!121i System Ass'y SOP

KEY PARTS LABEL

Anti-Static Cloth

BAR CODE LABEL

Twinhead International Corp.