User Guide

Revision: 0 Date: 2004.2.26 (Manufacturing Section): PE
Difference Operating item Part name/specification Part/number Q'TY Operation description Important note Jig/fixture
2 PRODUCT BAR CODE LABEL 63-000710-00 1
Attach PRODUCT BAR CODE LABEL on M/B as shown
in the diagram
N/A N/A
Explanation of illustrations
PAGE: 02
(Twinhead S.O.P) (Document NO): TESOP389
Name of S.O.P: efio!121i System Ass'y SOP
Working name: 7051
E12B-PCB ASS'Y-GM-PM-REV: 0-
W/BIOS SET
1 1
82-814700-00
3
E12T-SPONGE-FOR PALMREST
SPRING SHEET-KS-0026(5x5x6mm)
51-036216-00
N/A
MYLAR must not cover LED
light. Check PCMCIA and
MEMORY. Make sure rack is
not deformed and attach.
Get M/B. Make sure check MYLAR is correctly attached.
Check Memory Attach for deformities. Make sure Mylar is
correctly attached to Memory Attach. If all are correct wipe
the BARCODE.
1
Reveal black MYLAR. Attach a black sponge on the right of
the sleep mode button as shown in the diagram. Wipe M/B
Bar code
BARCODE MachineN/A
1
2
A
B
3
Twinhead International Corp.