User Guide

Revision: 0 Date: 2004.2.26 (Manufacturing Section): PE
Difference Operating item Part name/specification Part/number Q'TY Operation description Important note Jig/fixture
2
E12T-TOUCHPAD BRACKET-
C3776A
40-030885-01 1
Check the metal slice to make sure the shape has not
changed; attach as shown in the diagram
N/A N/A
3
SCREW ISOTT-M2.0X2L ∮
D3.4/H0.4mm-BLACK NI+SELF
41-760020-02 2 Lock screws on rack as shown in the diagram.
Attach aluminum foil onto
racks; align with holes
before locking screws.
Electrical screwdriver/Torque:
1.5 ±0.5Kgf-cm
PAGE: 10
(Twinhead S.O.P) (Document NO):TESOP387
Name of S.O.P: efio!121i UPPER COVER SOP
Explanation of illustrations
Working name: 6551-2
1 N/A N/A1 Tape (3~4cm) 61-080022-00
Attach tape on touchpad's connector as shown in the
diagram.
1
3
2
Aluminum foil holes
must align with screw
holes.
Twinhead International Corp.