User Guide

Revision: 0 Date: 2004.2.26 (Manufacturing Section): PE
Explanation of illustrations
Difference Operating item Part name/specification Part/number Q'TY Operation description Important note Jig/fixture
E12B-LOWER COVER-#8019-B1328A 40-002470-01
E12B2 E12B-LOWER COVER-#8750M 40-002470-10
2 CONDUCTIVE SPONGE 10X1X30mm 51-350094-06 1 Attach conductive sponge as shown in the diagram N/A N/A
3 N222S1-BATTERY HOOK 40-006040-00 1 Note the spring's direction.
4
N222S1-BATTERY LATCH SPRING-
D47900
40-011951-00 1 N/A
E12T-BATTERY LATCH 50-043080-01
E12B2
E12B-BATTERY LATCH-#8750 50-043080-10
6
SCREW BPS/W (∮5.5)-M2X3L-
NYLOK
41-420520-03 2 Lock screws on HOOK in a.b. order.
N/A
Electrical screwdriver/Torque:
1.5± 0.5Kgf-cm
(Twinhead S.O.P) (Document NO): TESOP387
Name of S.O.P: efio!121i UPPER COVER SOP Working name: 6502-1
Check appearance to make sure there are no scratches.
51
N/A
N/A
N/A
PAGE: 03
First fix opposite side of spring to base as shown in the
diagram. Then attach a spring onto HOOK and fix them
together on base.
N/A
Install BATTERY LATCH
Note direction: Arrow side faces
right.
11
4
6
3
1
move
smoothly
5
When clip
BATTERY
LATCH, centre
it brfore clipping
i
t.
2
Twinhead International Corp.