User Guide

Revision: 1 Date: 2004.03.25 (Manufacturing Section): PE
Explanation of illustrations
Difference Operating item Part name/specification Part/number Q'TY Operation description Important note Jig/fixture
1
N222S9-DOUBLE SIDE ADHESIVE-
W=10mm-TERAOKA NO.7221 ( 30 x 10 x
0.15mm)
27-300110-00 2
E12B-LCD BEZEL FOR TH-#8019 50-022330-00
E12B-LCD PANEL FOR TCL-#8750 50-022330-20
E12B-LCD BEZEL FOR TONG FANG-#8148 50-022330-10
P22AJ-RUBBER (TOP)-PANTONE 428C 52-002083-00
E12B2
E12B-RUBBER (TOP)-BLACK 52-002083-30
Lock screws on LCD PANEL's hinge as
shown in the diagram
N/A
Electrical screwdriver/torque:
2.0±0.5Kgf-cm
(Twinhead S.O.P) (Document NO): TESOP388
Working name: 6512-8
Name of SOP: efio!121i LCD MODULE ASS'Y SOP
Lock two screws on each side of the
LCD PANEL as shown in the diagram
N/A
Electrical screwdriver/torque:
1.5±0.5Kgf-cm
1
PAGE: 09
According to
BOM
2
Attach two pieces of rubber on LCD
PANEL's screws as shown in the diagram
Push the rubber into the proper
position
N/A3 2
3
2
1
Clip both side hooks
first BEFORE installing
panel
Twinhead International Corp.