User Guide

Revision: 1 Date: 2004.03.25 (Manufacturing Section): PE
Explanation of illustrations
Difference Operating item Part name/specification Part/number Q'TY Operation description Important note Jig/fixture
HYUNDAI
LCD
E12T-LCD BRACKET-L-C3773 40-030882-02
TOSHIBA
LCD
E12B-LCD BRACKET L FOR TOSHIBA 40-031261-00
2
SCREW ISOT-M2X3L-SELF-LOCKING ∮
D3.5mm t=0.8mm
41-721520-03 2 N/A
Electrical screwdriver/torque:
1.5±0.5Kgf-cm
HYUNDAI
LCD
E12T-LCD BRACKET R-C3772 40-030881-01
TOSHIBA
LCD
E12B-LCD BRACKET R FOR TOSHIBA 40-031260-00
N/A
1 N/A
N/A
1
Attach a 20mm long sponge above the LCD
connector as shown in the diagram.
N/A5 CONDUCTIVE SPONGE (10X1X20mm) 51-350094-06
3
N/A
(Twinhead S.O.P) (Document NO): TESOP388
Working name: 6512-5
Name of SOP: efio!121i LCD MODULE ASS'Y SOP
1
N/A
N/A
41-721520-03
Assemble LCD left-side rack and lock in place
with two screws.
PAGE: 06
Electrical screwdriver/torque:
1.5±0.5Kgf-cm
Assemble LCD right-side rack and lock in place
with two screws.
4
SCREW ISOT-M2X3L-SELF-LOCKING ∮
D3.5mm t=0.8mm
2
1
3
LCD left side
LCD right side
4
2
1
5
Twinhead International Corp.