User Guide

Revision: 1 Date: 2004.03.25 (Manufacturing Section):PE
Explanation of illustrations
Difference Operating item Part name/specification Part/number Q'TY Operation description Important note Jig/fixture
E12B-LCD COVER FOR TH-#8019-B1326 50-033110-00
E12B-LCD COVER FOR TONG FANG-#8148 50-033110-10
E12B-LCD COVER-ID2-#8750 50-033120-00
3 N222S8-LCD HOOK SPRING 40-011701-00 1
4 SCREW BPS/W M2.0 X 3.0L-NYLOK 41-420520-03 2
Tighten LCD hook on LCD cover as shown in the
diagram
Check to make sure the hook
works properly
Electrical screwdriver/torque:
1.5±0.5Kgf-cm
50-000310-01E12T-LCD HOOK
1
(Twinhead S.O.P) (Document NO): TESOP388
Working name: 6512-1
Name of SOP: efio!121i LCD MODULE ASS'Y SOP
PAGE: 02
N/A
2
N/A
Assemble LCD spring on LCD HOOK and fit
onto LCD cover
Note the direction of the spring
when fitting hook
1
1
Check appearance to make sure there are no
scratches.
N/A
3
1
2
Examine the switch to
make sure it works
perfectly
4
Twinhead International Corp.