User Guide

Twinhead International Corp.
Working name:
9501-7 Revision: 0 Date: 2003.09.08 (Manufacturing Section): PE
Explanation of illustration
Difference Operating Item
Part name/specification Part/number Q'TY Operation description Important note
Jig/fixture
1
P88TE-CARTON FOR W/CARRY BAG 61-050094-01 1
Assemble box
NA
NA
2 NA NA 2 Place the box into carton; gap faces gap. NA NA
3 Scotch tape
61-080007-01 1 Seal the box. 65cm~75cm NA NA
4 PACKING LABEL 63-001132-00 1
Place label as shown in the diagram
LABEL should be attached
ABOVE carton's part number
as shown above; do not cover
part the part number
NA
5 ALL MODULE PACKING 63-230XXX-00 2
Attach to the carton at an angle
Take care not to damage
packing
NA
6 ANGEL PROTECTOR 76X76X800mm 61-097608-00 1 NA NA NA
7
ANGEL PROTECTOR 76X76X1040mm 61-097615-00 1 NA NA NA
8 PALLET FOR SHARP AV-1 KL13020 61-110010-00 1 NA NA NA
PAGE： 08
( Twinhead S.O.P ) ( Document NO): TESOP285
Name of S.O.P.: efio!121A 2-IN-1 Packing SOP
4
5
1
3
2