User Guide

Revision: 0 Date: 2003.09.08 (Manufacturing Section): PE
Explanation of illustration
Pls refer to Quality assurance standard
( Twinhead S.O.P ) ( Document NO):TESOP284
PAGE: 05
Name of S.O.P:efio!121A Complete set Ass'y SOP
Working name:
(1)LCD and Panel
Gap=<0.8mm
1
Bottom and
bottom cover
Gap=<0.8mm
Step=<0.5mm
Step=<0.5mm
2
LCD Module and Hinge
Cap的Gap=<1.5mm
LCD Module and Hinge Cap
的Gap=<1.5mm
3
Upper cover and
bottom cover
Gap=<0.8mm
4
LCD Module and four corner
Gap=<1.0mm
This e\area is not
includes for
examination, but CD-
ROM's function
should be OK
Bottom and Bezel
Gap=<1.0mm
Upper cover and
Bezel Gap=<1.0mm
5
K/B and upper
cover
Gap=<0 5mm
Ga
p
=<0.8m
m
Battery and upper
cover Gap=<1.0mm
Upper cover and
p
alm res
t
Upper cover and palm
rest Gap=<0.5mm
6
CD-ROM Bezel bottom
cover Gap=<1.4mm
CPU Door and
bottom cover
ca
p
=<0.8m
m
Battery and bottom
cover Gap=<0.6mm
This e\area
do not
include for
examine
RAM Door and bottom
cover Gap=<0.8mm
7
For specific spec. Pls refer
to Quality assurance
standard
8
Gap=<0.2mm
Twinhead International Corp.
Right side is
locked