User Guide

Revision: 1 Date: 2003.10.14 (Manufacturing Section): PE
Difference Operating Item Part name/specification Part/number Q'TY Operation description Important note Jig/fixture
3
Tape (約2~3cm) 61-080022-00 1
Connect SPEAKER wires to M/B CONN; fix with
tape.
Wi
res nee
d
to
b
e arrange
d
i
n a
straight line and not interfere with
iron parts.
膠台
4NA NA 1
Connect PALM REST TOUCHPAD's wires to M/B;
insert PALM REST into BASE and make sure K/B
wires are not visible.
Insert FFC. If there is rugged edge on
LOWER COVER hook, tidy it up it
before assembling
鑷子
D212A-CAP FOR WL SWITCH-#8735 50-041100-10
P22AU-CAP FOR WL SWITCH-#8028 50-041100-00
PAGE: 13
NA NADate mark2 63-000042-XX 0
Attach date mark to palm rest panel's iron part as
shown in diagram.
Explanation of illustration
NA 77-636009-10 1
Check appearance to make sure there are no scratches
or damage
NA1
D212A-#8028 PALM REST KIT-
W/WIRELESS LAN
( Twinhead S.O.P ) (Document NO) : TESOP260
Name of S.O.P﹕efio!121A System Ass'y SOP
Working name: 7008
Note arrangement of CAP wires;
arrange wires as shown in diagram.
NAConnect CAP to M/B's connector as shown in diagram.51
1
Twinhead International Corp.
3
2
4
Check left and right buttons:
Press each button's four
corners separately. Replace if
there are any obvious
differences in clicking
Check up and down buttons: Press
each button's four corners
separately. Replace if there are any
obvious differences in clicking
5