User Guide

Revision: 0 Date: 2003.09.25 (Manufacturing Section): PE
Difference Operating Item
Part name/specification Part/number Q'TY Operation description Important note
Jig/fixture
1
K/B-85 KEY-TW-N222S8SA-
JME-FOR SOTEC
71-710101-00 1
Check the keyboard make sure printing is not fuzzy or damaged;
use cleaner to clean iron plate.
Make sure K/B's RUBBER is
not over banded as shown in
diagram
NA
2 KEY PARTS LABEL 63-250190-00 1 Attach KB onto KEY PARTS LABEL; wipe BARCODE NA bar code machine
3 NA NA 1 Connect KB's wires on M/B's CONN as shown in diagram Connect tightly NA
4 NA NA 0 Fix K/B on UPPER COVER as shown in diagram.
Check hook for damage. Note
that K/B upper side must fit
firmly in UPPER COVER
hook; make sure wires are not
visible from front side.
NA
PAGE: 11
( Twinhead S.O.P ) (Document NO) : TESOP260
Name of S.O.P﹕efio!121A System Ass'y SOP
Explanation of illustration
Working name: 7057
4
Twinhead International Corp.
Make sure K/B RUBBER
is not over banded
3
Make sure wires are not
visible from front side.
1
2