User Guide

Revision: 1 Date: 2003.10.14 (Manufacturing Section): PE
Explanation of illustration
Difference Operating Item Part name/specification Part/number Q'TY Operation description Important note Jig/fixture
1
P22AU-#8028M LOWER COVER
KIT-P22T
77-630007-C0 1
Check bottom cover's appearance to make sure there are
no scratches or damage
Make sure LAUNCH KEY is not
damaged or out of position
NA
2
CONDUCTIVE SPONGE
（5X1X20mm）
51-350100-00 1 Attach to bottom cover as shown in diagram
Attach following plow groove on
bottom cover
NA
3 PRODUCT BAR CORD LABEL 63-000710-00 1
Attach PRODUCT BAR CORD LABEL as shown in
diagram
NA NA
4NANA1
Place M/B in LOWER COVER, arranging wires as
shown in diagram. Plug fans wires into M/B; make sure
fan's position is correct and wires are hidden
NA NA
( Twinhead S.O.P ) (Document NO) : TESOP260
PAGE: 06
Name of S.O.P﹕efio!121A System Ass'y SOP
Working name: 7004
2
Twinhead International Corp.
Arrange MODEM wires from LOWER
COVER's gap
4
Wires must be attached below
p
art
3
1