User Guide

Revision: 0 Date: 2003.09.01 (Manufacturing Section): PE
Difference Operating Item Part name/specification Part/number Q'TY Operation description Important note Jig/fixture
2 TAPE 27-319003-00 1
Attach 6cm golden tape onto the inverter as
shown in the diagram
Golden tape must cover the
inverter
tape stand
3 SCREW ISOT M2X3L 41-721520-03 4
Insert and tighten screws to the left and right
sides of the LCD as shown in the diagram
NA
Electrical screwdriver/Torque:
1.5±0.5Kgf-cm
Explanation of illustration
( Twinhead S.O.P ) (Document NO): TESOP2
5
Working name: 6512-6
Name of SOP: efio!121A LCD MODULE ASS'Y SOP
NA1NA
PAGE: 06
Attach INVERTER to the base NA0NA
LCD right side
LCD left side
3
Twinhead International Corp.
2
Scotch tape
fixed inverter
as diagram
shows
INVERTER snap close to
bottom and stick it
INVERTER fixed as
diagram shows:
1