User Guide

Revision: 1 Date: 2003.09.15 (Manufacturing Section): PE
Explanation of illustration
Difference Operating Item Part name/specification Part/number Q'TY Operation description Important note Jig/fixture
1
LCD-12.1" XGA TFT-TOSHIBA-
LTD121LAOS-11
72-11223G-00 1
Check LCD panel to make sure surface is not
scratched
NA NA
2 KEY PARTS BARCODE LABEL 63-250190-00 2 Attach key parts label NA NA
3
N222S1-HARNESS FOR HSD 12.1" LCD -
SH640C
29-001640-00 1
Assemble LCD HARNESS on LCD CONN as
shown in the diagram
NA NA
4 N222S8P-MYLAR FOR LCD HARNESS 50-023324-00 1
Place white Mylar on LCD wire material and LCD
system
LCD wire material must rest
completely on the Mylar
NA
5 KAPTON TAPE 27-319003-00 1
Attach between golden adhesive tape and LCD
CONNECTOR as shown in the diagram
NA NA
6 TAPE (6cm) 61-080007-01 1 Stick TAPE to fix LCD wire material
Wire must be places at least 7
cm from the edge
NA
N222S8P-MYLAR_T FOR HYUNDAI LCD 50-023326-00 1
Tear off next Mylar; attach it aligned with upper
side as shown in the diagram
NA NA
N222S8P-MYLAR_R FOR HYUNDAI LCD 50-023327-00 1
Tear off next Mylar; attach it aligned with right side
as shown in the diagram
NA NA
Paste
TOSHIBA
LCD
8 CONDUCTIVE SPONGE(10x0.5x40mm) 51-350094-15 1
Attach conductive sponge to LCD wire material as
shown in the diagram
Sponge must be aligned with
the black line
NA
PAGE: 04
( Twinhead S.O.P ) (Document NO) :T
E
Working name: 6512-4
Name of SOP: efio!121A LCD MODULE ASS'Y SOP
Paste
Hyundai LCD
7
2
1 5
4
Twinhead International Corp.
2
6
6cm
3
8
7
Align to
right side
Align to
upper side