User Guide

Revision: 1 Date: 2003.09.25 (Manufacturing Section): PE
Explanation of illustration
Difference Operating Item Part name/specification Part/number Q'TY Operation description Important note Jig/fixture
1 N222S8P-LCD BRACKET L 40-030532-00 1
Assemble LCD bracket on base as shown in the
diagram
NA NA
2 N222S8P-LCD BRACKET R 40-030531-00 1
Assemble LCD bracket on base as shown in the
diagram
NA NA
PAGE： 03
( Twinhead S.O.P ) (Document NO) :TESOP259
Working name: 6512-2
Name of SOP: efio!121A LCD MODULE ASS'Y SOP
P22AJ-AL FOIL FOR LCD COVER Make sure it adheres smoothly
NA
Electrical screwdriver/Torque：
2.0±0.5Kgf-cm
Screw up left and right hinge LCD as shown in
the diagram.
241-720526-04SCREW ISOT M2.6X4L5
NA3
Remove adhesive paper, attach aluminum foil to
LCD COVER
40-008122-00 1
N222S8P-DISPLAY HINGE -SOTEC 40-015020-004 NAAssemble LCD HINGE on base as shown in the
d
NA2
2
1
3
Twinhead International Corp.
4
5
Level at the screw
hole, insert the
aluminum foil
between hinge and
iron
Level at the screw
hole, insert the
aluminum foil
between hinge and
iron