User Guide

Revision: 0 Date: 2003.09.01 (Manufacturing Section): PE
Difference Operating Item
Part name/specification Part/number Q'TY Operation description Important note
Jig/fixture
1
N222S8P-TOUCH PAD
BRACKET
40-030530-02 1
Check the metal slice make to sure its shape unchanged;
use jig set at a 30 degree angle.
NA Adjust jig
2 N222S8P-MYLAR 38X10X0.2T 50-023320-00 1 Attach MYLAR to BRACKET as shown in diagram NA NA
3 SCREW ISOT M2X3L-NYLOK 41-721520-03 3
Lock screw on BRACKET in a order of a.b.c as shown
in diagram.
NA
Electrical screwdriver/Torque:
1.5 ± 0.5Kgf-cm
4
P22AJ-FFC (P=1.0) FOR
TOUCHPAD
29-016338-00
1 Insert TOUCH PAD wires as shown in diagram. Do not cover banded wires. NA
PAGE: 13
( Twinhead S.O.P ) ( Document NO): TESOP261
Name of S.O.P: efio!121A PARM REST SOP
Explanation of illustration
Working name: 6551-4
3
2
1
4
Tape must be
attached at wire'ss
connection point.
Tw inhead International Corp.