User Guide

Revision: 0 Date: 2003.09.01 (Manufacturing Section): PE
Difference Operating Item Part name/specification Part/number Q'TY Operation description Important note Jig/fixture
HITACHI 20GB HDD
70-722201-00
HDD-30GB-IBM 70-822300-60
HDD-40GB-FUJITSU 70-922400-40
2 KEY PARTS LABEL 63-250190-00 1 Attach as shown in diagram. NA NA
3 N222S1-HDD BRACKET 40-030691-00 1 Install as shown in diagram NA NA
4 SCREW ISOF-M3.0 X 4.0L 41-870130-04 4
Tighten HDD BRACKET in a.b.c.d. order as shown in
diagram.
NA
Electrical screwdriver/Torque:
1.5 ±0.5Kgf-cm
5
D212A-AL FOIL FOR HDD BRACKET
40-008140-00 2 Attach aluminum foil as shown in diagram NA NA
6
HDD IMAGE
65-000110-00 1
Copy HDI
According to BOM HDD COPY machine
7 MO LABEL 63-000710-00 1
Attach as shown in diagram when HDD COPY is finished.
Attach HDD LABEL as shown in diagram
N/A NA
8 KAPTON TAPE(10mm) 27-319020-00 1 Attach yellow tape to HDD Bracket as shown in diagram.
Note: Tape should cover rack's
lockhole
NA
PAGE: 09
11
Check HDD; make sure there are no scratches or damage.
Check the metal pins to make sure it is not banded.
Select drive based on customer's
needs.
NA
Name of S.O.P: efio!121A HDD SOP
Working name:6506-1
Explanation of illustration
( Twinhead S.O.P ) ( Document NO): TESOP261
1
4
2
Work no.
HDI
Port
7
8
3
a
b
c
d
4
5
Tw inhead International Corp.