User Guide

Revision: 0 Date: 2003.09.01 (Manufacturing Section): PE
Difference Operating Item Part name/specification Part/number Q'TY Operation description Important note Jig/fixture
1 NA NA NA Take CD-ROM and eject disc tray
CD-ROM BEZEL 50-962801-XX
DVD BEZEL 50-963401-xx
CD-RW BEZEL 50-962801-XX
3 SCREW BTB 1.7*3L BLACK 41-650217-03 1 Lock up screws on BEZEL as shown in diagram.
Eject tray 30 mm; place it on a table
surface
Screwdriver /Torque: 0.8±0.2Kgf-
cm
CD-RW 4 SCREW BTB 1.7*3L BLACK 41-650217-03 2
Tighten screws in order of a.b. (When screwing CD-
RW's bezel , at (3)､(4) total of 3 screws.
NA
Electrical screwdriver/Torque:
0.8± 0.2Kgf-cm
Quanta DVD 5 TAPE (NARROW)-1cm 61-080022-00 1
When using Quanta DVD-ROM, attach a tape at the
BEZEL right side hook and then assemble.
Tape is required when using a
Quanta DVD
N/A
1 Install BEZEL on CD-ROM tray base.
( Twinhead S.O.P ) ( Document NO): TESOP261
Explanation of illustration
PAGE: 08
Name of S.O.P: efio!121A CD-ROM SOP
Working name: 6504-2
Check that bezel serial number is
correct; Bezel must conform with
CD-ROM. Do not let BEZEL change
shape
NA2
2
3
1
Poke from here
4
a
b
Tw inhead International Corp.