User Guide

Revision: 0 Date: 2003.09.01 (Manufacturing Section): PE
Difference Operating Item
Part name/specification Part/number Q'TY Operation description Important note
Jig/fixture
1
N222S1-HDD SPONGE FOR LOWER
UP SIDE
51-036041-00 1 Attach as shown in diagram N/A Mylar
2
N222S1-HDD SPONGE FOR LOWER
DOWN SIDE
51-036042-00 1 Attach as shown in diagram NA NA
3 CONDUCTIVE SPONGE (5x3.5x80mm) 51-350094-02 1 Attach as shown in diagram (50mm) NA NA
4 CONDUCTIVE SPONGE (5x5.5x80mm) 51-350094-03 1 Attach as shown in diagram (50mm) NA NA
5 N222S8L-MYLAR-10X4X0.2T-SOTEC 50-023310-00 1
Attach black MYLAR on bottom cover as shown in
diagram
NA
NA
6
P22AJ-MYLAR FOR RJ11 LEFT SIDE
t:0.2 (7X2X0.2tmm)
50-023335-00 1
At RJ11, add Mylar on bottom cover as shown in
diagram
NA NA
Explanation of illustration
PAGE: 05
( Twinhead S.O.P ) ( Document NO): TESOP261
Name of S.O.P: efio!121A lower cover SOP
Working name: 6502-2
38mm
1
4
3
2
5
6
Follow the edge of the line to
attach the Mylar. Be careful
to stick in the exact position
indicated.
Tw inhead International Corp.