Technical information

AUTOTRONIC CONTROLS CORPORATION • 1490 HENRY BRENNAN, EL PASO, TEXAS 79936 • [phone] • FAX [phone]
www.msdignition.com email: [e-mail]
81
MSD LAUNCH CONTROL TO MSD 7AL-2
8
8
9
9
10
7
7
6
0
5
4
4
3
3
2
2
1
1
5
6
1000
’
s
10 0
’
s
TMTM
PN 8735
LAUNCH
CONTROL
LAUNCH
CONTROL
with 3 STEPwith 3 STEP
SHIELDED CABLE
TO GROUND
RED TO IGN TERMINAL
TRANSBRAKE
12V SWITCH
SWITCHED
12 VOLT
RED
BURNOUT
LAUNCH
RACE
BURNOUT
LAUNCH
RACE
(BURNOUT RPM)
- ACTIVE WITH 12 VOLTS ON RED WIRE.
- ACTIVE WITH 12 VOLTS ON BLUE WIRE. THIS LIMIT WILL BE
ACTIVE IF 12 VOLTS ARE ON THE RED AND BLUE WIRES.
- ACTIVE WITH NO VOLTAGE.
(LAUNCH RPM)
BLUE
TRANSBRAKE
SOLENOID
LINE LOCK
SOLENOID
T
A
C
H
C+
C-
IGN
PTS
M+
M-
GROUND
RPM
TO BATTERY
TO BATTERY
HEAVY BLACK
HEAVY RED
+
MSD LAUNCH CONTROL, PN 8735
The 2-pin connector of the Launch Control can only be installed one way to operate correctly. There is an LED on
the control that will light when the connector is in the correct position.
Bare Wire: Connects to ground. This ground acts as an EMI shield for the wiring of the control.