Technical information

AUTOTRONIC CONTROLS CORPORATION • 1490 HENRY BRENNAN, EL PASO, TEXAS 79936 • [phone] • FAX [phone]
www.msdignition.com email: [e-mail]
29
MSD 6 SERIES TO
GM DUAL CONNECTOR COIL
MSD 6 SERIES TO
'96 AND UP SINGLE CONNECTOR COIL
NOTE: MSD offers a direct plug in harness,
PN 8876, for this coil.
NOTE: Cut and splice the two pink wires (coil
positive) together and connect to orange
wire of MSD. Cut and splice the two white
wires (coil negative) together and
connect to the white of MSD. If the vehicle
is not equipped with a factory tach, there
will only be one white wire.
NOTE: MSD offers a direct plug in harness that
makes this a splice free installation.
Harness PN 8877 - 1996-on GM Vehicles.
NOTE: The coil connector is labeled A-B-C. The wire in the A
port is positive (pink). The wires in B and C are coil
negative wires, color will vary by application.