Specifications

POSTFLIGHT 83
Scenario 2: Check the calibration status
Use the following procedure to check the calibration status prior to printing a job.
TO CHECK THE CALIBRATION STATUS AND PRINT WITH THE OPTIMUM CALIBRATION CONDITION
1 Print the job from an application and set the print options.
For information about how to set print options with the Adobe and Microsoft PostScript
printer drivers for Windows, see Printing.
For information about how to set print options with the printer drivers for Mac OS, see
Printing.
Alternatively, submit the job to the EX700i Hold queue, and then set print options in Job
Properties in Command WorkStation.
2 On the Job Info tab, choose Concise Report from the Postflight menu.
For information about Postflight reports, see page 78.
3Print the job.
The Concise Report page is printed.
4 Review the information in the ColorWise global settings page.
5 Perform calibration, if needed.
If service has been performed on the print device since the last calibration, or calibration has
not been performed, perform calibration using the calibration setting specified in the
Postflight report.
For more information about calibration, see Calibration.
6 Print the job and choose Off from the Postflight menu.
The job is printed to the newly calibrated EX700i.