Specifications

POSTFLIGHT 82
TO DIAGNOSE AN UNEXPECTED COLOR AND PRINT WITH EDITED COLOR SETTINGS
1 Print the same job and choose All Components from the Postflight menu.
Postflight Test Page, color-coded document pages, and Postflight Reports are printed.
For information about the components of Postflight, see page 77.
2 Review all Postflight pages.
For information about the Postflight pages, see page 77.
3 Make appropriate changes based on all Postflight pages.
Depending on your printing environment, the condition of the print device, and the color
settings, possible changes are as follows:
• Correct problems with the print device (see the documentation that accompanies the
print device).
• Calibrate the EX700i (see Color Printing).
• Edit the colors of the output profile with Command WorkStation (see Command
WorkStation Help).
• Change the default settings in Command WorkStation (see Command WorkStation
Help).
Change the job specific print option settings using Command WorkStation Job Properties.
4 Print the job and choose Off from the Postflight menu.
The job with the edited color settings is printed to the EX700i.
5 Repeat these steps, if needed.
Repeat the steps until you get satisfactory color results.