Specifications

CALIBRATION 48
Calibrating in Command WorkStation
Multiple users can connect to one EX700i with Command WorkStation, but only one user at
a time can use Calibrator. If you try to calibrate when another user is using Command
WorkStation to calibrate, an error message appears.
TO CALIBRATE THE EX700I IN COMMAND WORKSTATION
• In Command WorkStation, in Job Center, click the Calibrate icon.
Or
• In Command WorkStation, in Device Center, go to General > Tools and click Calibrate.
Or
• In Command WorkStation, in Job Center, right-click a job and choose Calibrate.
In this case, Calibrator automatically selects the calibration setting used by the job.
1Calibrate icon
1
1 Start Calibrator.
2 Manage calibration settings.
3 Set Calibrator preferences.
1
2
3