Specifications

CALIBRATION 47

Checking calibration status

You can verify whether the EX700i is calibrated in Command WorkStation.

TO CHECK THE CALIBRATION STATUS FOR A JOB

• In Command WorkStation, in Job Center, select the job.

The time of the most recent calibration is displayed in the lower-right corner.

TO CHECK THE STATUS OF A CALIBRATION SETTING

1 In Command WorkStation, in Device Center, go to General > Tools and click Manage under

Calibrate.

The list of calibration settings on the EX700i appears in Calibrator.

2 Check the “Last calibrated” column for the particular calibration setting.

This column shows last time the EX700i was calibrated for the calibration setting. “Default

measurements” indicates the factory settings.

You can set Calibrator preferences to optionally display a warning or suspend printing if

calibration is out of date. For more information, see Calibrator Help.

NOTE: You can disable calibration (and color management) for CMYK data in a job by using

the ColorWise Off setting for the CMYK/Grayscale Source option. You might want to disable

calibration for testing purposes, for example. For more information, see “CMYK/Grayscale

Source or Device Link” on page 19.

1 Last calibrated