Instruction Manual

Attach the Keypad ⑦ with Screws (F) to the tabletop.
F
2
Screwdriver
STEP 10
STEP 11
Screwdriver
F
2
Plug the cable from the Keypad into the Control Box and flip the table onto its feet.
Note: The Control Box is equipped with a gyro sensor so the table and the Control Box
must be level in order to work properly or else it will not move up and down.
Power Port
Lifting Column Ports
Lifting Column Ports
Keypad Port
Power Port
Lifting Column Ports
Keypad Port