Ethernet Router User's Guide

SpeedStream Dual USB/Ethernet Router User’s Guide
Model 5667
5
2
Appendix A
Configuration Data Sheets
Your router is preconfigured with settings specific to your network. Recording these settings is important
in case your router is inadvertently reset to the default configuration and you need to reestablish your
original configuration.
Use the following worksheets to record your router’s current configuration. The worksheets are organized
on the following pages according to the following services and features: Simple Setup settings, router
configuration, password information, and settings for LAN IP, DHCP, DNS, RIP, and NAPT.
Simple Setup
The options in Simple Setup allow you to configure the router for basic routing operation and require only
the configuration of the PPP type and PPP authentication parameters. The router uses the factory default
parameters for all other operational parameters
Parameter Default Value Your Value
PPP Authentication
Username (Provided by IP)
Password (Provided by IP)
Router Configuration
Parameter Default Value Your Value
ATM VC
VPI
VCI
0000081
2335363738
3535
Multiplexing (encapsulation)
Mode
LLC/SNAP
LLC/SNAP  VC Multiplexing
Connection Type (Not used when in
PPPoE/PPPoA mode)
Bridge  Router
Local IP Information (if router
connection type)
ADSL IP Address
ADSL IP Subnet Mask
None
None
PPP Type PPPoE
PPPoA  PPPoE
PPP Authentication
Username
Password
None
None