SpeedStreamâ Dual USB/Ethernet Router with SecureRoute Model: SpeedStream 5667 User’s Guide Part No.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 Copyright 2001, Efficient Networks, Inc. All rights reserved. Printed in the U.S.A. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies. Efficient Networks, Inc. shall not be liable for technical or editorial errors or omissions in this document; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material. Efficient Networks, Inc.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 EFFICIENT will not honor, and will consider the warranty voided, if: (1) the seal or serial number on the Product have been tampered with; (2) the Product’s case has been opened; or (3) there has been any attempted or actual repair or modification of the Product by anyone other than an EFFICIENT authorized service provider.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 TABLE OF CONTENTS Introduction............................................................................................................................................6 About the SpeedStream Dual USB/Ethernet Router ...............................................................................6 Features and Benefits.........................................................................................................................
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 Configuration Access .....................................................................................................................46 Troubleshooting....................................................................................................................................48 Using LEDs ......................................................................................................................................
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 Chapter 1 Introduction Congratulations on your purchase of the SpeedStream® Dual USB/Ethernet Router with SecureRouteTM. Siemens is proud to provide you with a powerful yet simple communication device for connecting your local area network (LAN) to the Internet.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 Applications The SpeedStream Dual USB/Ethernet Router with SecureRouteâ provides many advanced features and functionality: • LAN Access – Provides connectivity via USB or Ethernet connection, simplifying network setup for homes and small offices. • Shared IP Address – Provides Internet access for up to 253 users with a single shared IP address, allowing multiple users to simultaneously browse the Web.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 Chapter 2 Installing the Router Before installing the SpeedStream® Dual USB/Ethernet Router with SecureRouteTM, verify that you have all the items listed under “Package Contents.” If any items are missing or damaged, contact your local Siemens distributor. After installing the router, refer to the subsequent chapters in this document for additional instructions on configuring network and router settings.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 SpeedStream installation CD-ROM Documentation: Quick-Start Guide, Safety and Certifications Information Minimum System Requirements Make sure your PC is equipped at minimum with the following: • • • • A network adapter card that supports Ethernet 10BASE-T/half duplex (if using Ethernet connectivity option) Operating system that supports TCP/IP over Ethernet Internet Explorer or Netscape versions 4.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 Hardware Features AAL and ATM Support VCI 0-65535 address range Connectors ADSL interface: RJ-11 Ethernet interface: RJ-45 Console interface: 5-pin MiniDIN RS-232 USB Type B interface Standards Compliance DMT, ADSL LED Indicators After powering on the router, all LED indicator lights turn a solid green. The LED behavior will change depending on the various connection states and data activity of the router.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 Confirm that you received all the items listed in the previous section, “Package Contents”; then position the SpeedStream router at any convenient location in your office or home. No special wiring or cooling requirements are needed. You should, however, comply with the safety guidelines specified in Chapter 1, “Introduction.” Basic Installation Procedure 1. 2. 3. 4. 5. 6. Install line filters (if provided). Connect the cables.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 Wall-Mount Filter For a wall-mounted phone, install a wall mount filter: 1. Remove the phone. 2. Connect the wall mount filter to the wall plate. 3. Reconnect the phone. Two-to-One Adapter If your DSL router and another device will share the same phone jack, install a two-to-one adapter: 1. Plug the two-to-one adapter into the phone jack. 2. Plug a line filter into one of the sockets of the two-to-one adapter.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 Determine the cable to use for your physical connection, and then follow the instructions for the appropriate installation method. The following illustration shows the connectors on the rear panel of the SpeedStream router. USB Installation Method The router power button should be in the OFF (out) position before proceeding: 1. Connect the USB cable to the USB port at the rear of the router. 2.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 5. Plug the power adapter into the power outlet and router. 6. Power on the computer; then power on the router. Note: If connecting via USB, the Plug-and-Play process for installing the USB drivers begins as soon as you turn on your computer and the router device is discovered. Insert the SpeedStream CD-ROM and follow the instructions on the screens to install the drivers. Ethernet Installation Method 1.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 Chapter 3 Configuring Network Settings To access the Internet through the SpeedStream Dual USB/Ethernet Router, the TCP/IP protocol must be installed on your computer and configured with the same IP address and subnet as the router. If TCP/IP is not already installed on your computer, refer to your system documentation or online help for instructions.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 3. In the TCP/IP Properties dialog box, click the IP Address tab. 4. On the IP Address tab, ensure that Obtain IP address automatically and Detect connection to network media are selected. 5. Click the DNS Configuration tab. 3. On the DNS Configuration tab, ensure that Disable DNS is selected. 4. Click OK twice to save your settings. 5. Reboot if prompted.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 Windows NT 4.0 1. On the Windows desktop, click Start | Settings | Control Panel; then doubleclick the Network icon. The Network dialog box displays. 2. In the Network dialog box, click the Protocols tab. 3. On the Protocols tab, select TCP/IP Protocol; then click Properties. The Microsoft TCP/IP Properties dialog box displays. 4.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 5. In the Microsoft TCP/IP Properties dialog box, click DNS tab. 6. On the DNS tab, delete any IP addresses listed in the DNS Service Search Order box. 7. Click OK twice to save your settings. 8. Reboot if prompted. Windows 2000 1. On the Windows desktop, click Start | Settings | Control Panel. 2. On the Control Panel menu, doubleclick Network and Dial-up Connections.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 5. In the Internet Protocol (TCP/IP) Properties dialog box, ensure that Obtain IP address automatically and Obtain DNS server address automatically are selected. 6. Click OK twice to save your settings. 7. Reboot your computer if prompted.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 Windows XP 1. On the Windows desktop, click Start | Network Connections | Local Area Connection. 2. In the dialog box, click to highlight Internet Protocol (TCP/IP); then click the Properties. The Internet Protocol (TCP/IP) Properties dialog box displays.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 3. In the Internet Protocol (TCP/IP) Properties dialog box, ensure that Obtain IP address automatically and Obtain DNS server address automatically are selected. 4. Click OK twice to save your settings. 5. Reboot your computer if prompted You can now configure the SpeedStream Dual USB/Ethernet Router as detailed in the next chapter.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 Chapter 4 Configuring the Router Before you can configure the SpeedStream® USB/Ethernet Router with SecureRouteTM, the TCP/IP protocol must be installed and configured on all computers in your network. If you need to install TCP/IP, refer to your system documentation or online help. To configure TCP/IP, refer to Chapter 3, “Configuring Network Settings” in this document.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 Simple Setup Main menu item; allows you to set PPP username and password, select a firewall setting, and change the system password. Advanced Setup Main menu item; provides access to advanced features for those users who require a custom router configurations, including Configuration Procedures, Status and Statistics, Command List. Also includes Initial Setup provisions and Configuration Procedures.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 Menu Screen Name Description • DSL Channel Info • DSL Physical Layer Info • DSL Line Status Command List • • • • • • • • • • • • • • • • • atmping dhcpcfg dns dslstatus ethip ip ipgateway firewall password ping portforward ppp reboot ripcfg route vc wanaccess • • • • • • • • • • • • • • • • • ATM “Ping” DHCP Server/Relay Configuration Configure DNS Settings DSL Status LAN IP Configuration IP Configuration IP Gateway/Default Router Configur
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 6. On the Enter Network Password screen, enter the default username and password: Username: admin Password: admin Then click OK. The System Status screen is displayed. Note: The password is case-sensitive. Recording System Settings Appendix A, “Configuration Data Sheets,” provides you with a location to record the current configuration of the router.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 Simple Setup From the Simple Setup screen, you can configure the router for basic routing operation and entering authentication parameters. 1. From the main menu, select Simple Setup. 2. Enter username and password. Note: You may ignore “Set the password for this modem” and “Set the security level for the firewall”, if you want to leave these settings at the default values.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 3. Click Apply, if you are not changing the password for the modem and the security level for the firewall. 4. Select the system password for this modem. 5. Set the security level for the firewall. 6. Click Apply.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 Advanced Setup From the Advanced Setup menu, you can configure advanced functions including special applications configuration, and remote management. We highly recommend that you keep the default settings unless you have a specific need to change them.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 Status and Statistics Selecting Status and Statistics from the main menu displays the DSL Status screen.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 System Password To set or change the system password, click Set System Password beneath the main menu or under Initial Setup on the Advanced Setup submenu.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 WAN Virtual Connection Under Configuration Procedures on the Advanced Setup submenu, click WAN Virtual Connections to view or modify virtual connection settings.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 RCF 1577 Connection 32
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 PPP Connection 33
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 RCF 2684 Connection 34
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 LAN Configuration Under Configuration Procedures on the Advanced Setup submenu, click LAN to modify the LAN IP address or subnet mask.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 DHCP Configuration Under Configuration Procedures on the Advanced Setup submenu, click DHCP to view or modify the current DHCP server settings.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 DNS Configuration Under Configuration Procedures on the Advanced Setup submenu, click DNS to add or remove DNS servers and domain search entries, and enable or disable the DNS relay. Firewall Configuration Under Configuration Procedures on the Advanced Setup submenu, click Firewall to enable or disable the router firewall, and set the firewall security level. From this sub-menu the firewall can also be temporarily disabled via the snooze button.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 The following table shows the security of each mode of the firewall as per the application/protocol. The Snooze mode is when the firewall is disabled for the time specified.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 Application/Protocol Security High In Medium Out In Out Low In NAPT Off Out In Out IGMP √ √ √ SSH √ √ √ √ √ √ √ √ √ √ SIP √ √ H.323 √ √ T.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 Application/Protocol Security High In Out Medium In Out Low In NAPT Off Out In Out ICU II √ √ CUSeeMe √ √ Napster √ √ GNUtella √ √ ICQ 2000 √ √ Calista IP Phone √ √ √ Buddy Phone √ √ √ Dialpad √ √ √ Net2phone √ √ √ √ √ Netshow Client Heretic II √ √ √ Abuse.Net √ √ √ Asherons Call √ √ √ BattleNet √ √ √ Bungie.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 Application/Protocol Security High In Out Medium In Out Low In NAPT Off Out In Out doom √ √ √ Quake II √ √ √ Quake Arena √ √ √ Rainbow Six √ √ √ Kali √ √ √ Starcraft √ √ √ Counterstrike √ √ √ Ultima Online √ √ √ Unreal Tournament √ √ √ Descent II/III √ √ √ Red Alert II √ √ √ Tiberian Sun √ √ √ Dune 2000 √ √ √ Baldur’s Gate II √ √ √ Rogue Spear √ √ √ Warcraft √ √ √ Age of Em
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 Application/Protocol Security High In Medium Out In Out Low In √ NAPT Off Out In Out √ √ VNC √ √ PCAnywhere √ √ √ √ MS Netmeeting (Chat, White board, file transfer, audio, video) √ √ XDM √ √ Need for Speed Traceroute √ √ Note: All protocols/apps are conditionally allowed IN if the outbound session was initiated locally and allowed OUT.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 Port Forwarding Configuration Under Configuration Procedures on the Advanced Setup submenu, click Port Forwarding to configure one or more port forwarding services on the WAN.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 IP Routing and RIP Configuration Under Configuration Procedures on the Advanced Setup submenu, click IP Routing and RIP Configuration to: • • • • View current IP information for all interfaces on the router. Configure the IP gateway (default router). View or modify the Routing Table and configure static routes. View or modify the RIP configuration.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 Configure IP Gateway View/Modify Routing Table 45
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 View RIP Configuration Modify RIP Configuration After selecting the desired Interface the following screen will appear. From this screen you may select the Mode, Version, and Operation of RIP. Configuration Access Under Configuration Procedures on the Advanced Setup submenu, click Configuration Access to enable or disable Telnet or HTTP configuration access from the WAN.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 47
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 Chapter 5 Troubleshooting Connection problems usually occur when the router’s software configuration contains incomplete or incorrect information. Diagnostic tools are available to help identify and solve problems that may occur with your router. Using LEDs STEP 1: Check the LEDs on the front panel Certain hardware problems can be diagnosed and solved by checking the LEDs.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 Carrier Not Detected – Not Lit If the Ethernet LED is not lit, check the connection on the other end of the Ethernet cable. Carrier Detected - Solid Green There are conditions in which the Ethernet link will not be operational when the green Ethernet LED is lit. The Ethernet interface on the host computer or hub connected to the router's Ethernet port should be set to half-duplex, no auto-negotiation. Otherwise connectivity problems can arise.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 Make sure the PC and target router are on the same IP subnetwork or the target router is reachable through a router on your LAN. They can, however, be on different networks if IP routing is off. Check Network TCP/IP properties under Windows 95 and the control panel of the TCP/IP driver installed. Troubleshooting: ATM Connectivity The ATM physical layer provides a mechanism for monitoring cell delineation.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 PPP Troubleshooting Capture a PPP Trace for Debugging 1. Unplug DSL cable. 2. Using Simple setup, enter username/password. 3. Select Transfer form the main menu, then select Capture Text. 4. Enter the following command via console: ppp event {1-9} (9 displays all PPP information) event show (enables logging) 5. 6. 7. 8. 9. Insert DSL cable. Once showtime (DSL sync) is reached, the 5667 will attempt to connect.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 Appendix A Configuration Data Sheets Your router is preconfigured with settings specific to your network. Recording these settings is important in case your router is inadvertently reset to the default configuration and you need to reestablish your original configuration. Use the following worksheets to record your router’s current configuration.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 Parameter Default Value Your Value Authentication Method CHAP CHAP PAP Service/Feature Configuration Router Password Settings Use this form to record your username and password for accessing the router. Parameter Default Value Password Username Password admin admin Your Value LAN IP Settings Use this form to configure Ethernet LAN IP settings. Parameter Default Value Your Value LAN IP IP Address Subnet Mask 192.168.254.254 255.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 Firewall Configuration Use this form to record Firewall settings. Parameter Default Value Mode Snooze low 30 Your Value Port Forwarding Configuration Use this form to record Port Forwarding settings. Parameter Default Value Your Value 23/telnet 21/ftp 80/http 192.168.254.254 192.168.254.254 192.168.254.254 RIP Settings Use this form to record RIP settings.
SpeedStream Dual USB/Ethernet Router User’s Guide Model 5667 Appendix B Technical Specifications Routing RFC 2364 Point-to-Point protocol over ATM PVCs (PPPoA) RFC 2684 (formerly 1483) Bridged Ethernet and routed encapsulation RFC 1577 Classical IP over ATM Network Address Port Translation (NAPT) DHCP server and DNS relay agent Configurable PAP and CHAP authentication Packet filtering Point-to-Point protocol over Ethernet (PPPoE) Management Intuitive, Web-based GUI management access SNMP support Comprehen
