Installation guide

Efficient Networks Factory Default Settings 29
Appendix B
Factory Default Settings
The factory default configuration of the 5600 series router will be
appropriate for most users. Configuration changes can be made from the
“Advanced Setup” section of the web interface.
Table 2 Factory Default Configuration
Configurable Item Default Settings
Operating Mode Router
Ethernet Interface IP Address 10.0.0.1
Network Mask 255.0.0.0
IP Gateway (Default Route)
Address
None
DSL (WAN) Interface IP Address None
Network Mask None
Data Encapsulation Protocol PPP
PPP Authentication Username ENI-Router
Password ENI-Router
PPP Multiplexing method LLC/SNAP encapsulation
Hostname speedstream
Domain name domain.invalid
DHCP server Enabled
DNS Enabled
DNS Resolver or Forwarders None specified
NAPT Enabled
RIP Enabled; uses RIP2 in passive mode
IP Filtering Disabled
Spanning Tree (bridge only) Disabled