Installation guide

22 Bridge Configuration Efficient Networks
are available on the web interface. Click “Advance Setup” and then “5600
Series Command Line Interface User’s Guide”.
Method 1: Via Telnet
1
Start your Telnet client. If you are using Windows on a PC, select
Start > Run and enter telnet 10.0.0.1. If you are on a UNIX system,
type
telnet 10.0.0.1.
2 The Telnet client connects to the bridge and displays a command line
prompt.
3 Enter the desired command(s) and any necessary configuration
parameters as prompted.
The bridge can also be reset to the factory default configuration from the
command line interface using the
default all command.
Method 2: Via a the Serial Port
1 Select Start > Programs > Accessories > HyperTerminal >
HyperTerminal
2 Enter a name in the “Connection Description” window and click OK
3
In the “Connect To” window, select the serial port you have
connected to the router and click
OK.
4 Enter the following port settings:
5 Click OK.
6 When the HyperTerminal window appears, you must press the [Enter]
key five times to get the “Command->” prompt.
Bits per second 38400
Data bits 8
Parity None
Stop bits 1
Flow Control None