Installation guide

Efficient Networks Installation Instructions 11
Interpreting the Router Lights
Figure 4 Front view of the Router
The router is equipped with four lights on the front panel: the System light
(
sys), ATM light (atm), DSL light (dsl), Ethernet light (enet).
1 All four lights flash red for a moment as the hardware initializes.
Then, the
sys light turns yellow while the router performs a self-test.
The
sys light turns green when the unit has finished passing
diagnostic tests.
2 The dsl light will flash green while the router is attempting to obtain
the optimum transmission rate over the DSL line. If a DSL link
cannot be established, the light will flash green and yellow. When a
link is established, the
dsl light turns solid green.
3 The enet light will turn solid green when there is a link detected, then
begin to flash green when Ethernet traffic is flowing.
4 The atm light will flash green indicating traffic flow on the DSL line.
sys atm dsl enet
6SHHG6WUHDP