User`s guide

SpeedStream Wireless DSL Gateway Advanced Features
67
Wireless Filter and Options Configuration
The “Wireless Filter Configuration” window allows you to either permit or deny access to the gateway of
wireless devices based on the MAC address of the device. A MAC (Media Access Control) address
refers to a hardware address that uniquely identifies each device of a network. Note: Please see the user
documentation for each device you wish to deny or allow access for a particular MAC address.
Figure 62. Wireless Filter Configuration Window
To use the wireless filter configuration:
1. Select the “Enable” option to either allow or deny access to the gateway. Note: If you select the
“Disable” option, all devices have access to the gateway.
2. If the “Enable” option was selected in step 1, click the “Allow” or “Deny” option next to the “Filter
Mode” heading. The “Allow” option allows all of the MAC addresses entered in the table below
access to the gateway. The “Deny” option denies all of the MAC addresses entered in the table below
access to the gateway.
3. Type the MAC address in the “MAC Address” column of each device in which you either want to
allow or restrict access.