Manualshelf

User`s guide

ManualsBrandsEfficient Networks ManualsComputer equipmentSpeedStream 4000
61626364656667686970
SpeedStream Wireless DSL Gateway Advanced Features
59
Wireless Network (Optional)
This option allows you to either setup or configure a pre-existing setup of the wireless equipment in your
gateway
. Note: This option is only shown when a SpeedStream wireless expansion card is installed in the
SpeedStream 6200 Gateway, or with the SpeedStream 6300 model with built-in wireless interface.
The wireless settings on the Gateway must match those of any wireless clients on your network.
To use the wireless network option:
1. Click the “Configure the Local SpeedStream Gateway Wireless Network” hyperlink. The system
responds with the “Wireless Setup Configuration” window.
Figure 54: Wireless Setup Configuration Window
2. Select the “Enable” option.
3. Type your wireless network ID in the “SSID” (Service Set Identifier) box.
4. Optionally, change the “Channel ID” drop-down from 11 if you experience any interference with
your wireless gateway.