User`s guide

SpeedStream Wireless DSL Gateway Advanced Features
57
Server Ports
Common applications such as HTTP (Web site traffic), FTP, and Telnet use pre-defined incoming port
numbers for compatibility with other services. If you wish to change the ports used by these applications
you may do so from this screen. This feature is recommended for use by advanced users only.
To use the server port option:
1. Click the “Configure the Local SpeedStream Gateway Server Ports” hyperlink. The system responds
with the “SpeedStream Gateway Server Ports” window.
Figure 52: Server Ports Screen
2. Optionally, type a port number in the “HTTP” box. The default port for this field is 80.
3. Optionally, type a port number in the “FTP” box. The default port for this field is 21.
4. Optionally, type a port number in the “Telnet” box. The default port for this field is 23.
5. Click Apply. The system responds with the “Your settings have been saved” window.
6. Optionally, click Reboot if you wish for the settings to immediately be implemented. The system
responds by restarting your gateway.