User`s guide

SpeedStream Wireless DSL Gateway Advanced Features
47
Advanced Internet Options
All of the options in this section should only be configured with the help and guidance of your ISP.
Incorrect changes to any of these options, could result in the failure of your Internet connection.
ATM Virtual Circuits
The ATM virtual circuit option provides access to settings that your Internet Service Provider may advise
you to modify depending upon your service needs. This option allows the creation and configuration of a
PVC (Permanent Virtual Circuit) across a network. A PVC is used to maintain a permanent connection
between two points on a network. Note: ATM Setting changes should not be made unless you are
advised to do so by your Internet Service Provider.
To access the ATM virtual circuit option:
1. Click Advanced Settings. The system responds with the “Advanced Internet Options” window.
Figure 41: ATM Virtual Circuits Screen
2. Click the “Configure ATM Virtual Circuit” hyperlink. The system responds with the “ATM Virtual
Circuit Wizard” window.
Static Routes
The static routes option allows you to configure static routes to remote equipment. These routes appear in
the routing table. Static routing allows a pre-defined route to be set for the transmission of data. Static
routes take precedence over all dynamic routing options and also provide enhanced security over dynamic
routing.